Bits, Burs, Sanders and more.

Cut perfect v grooves even in the most difficult end grain wood.  Create
hair, fur, & texture anywhere with these remarkable diamond V wheels.
Real diamond grit permanently bonded to each wheel makes for an efficient
and long lasting cutter.  Popular 1/8" shank fits most power carvers and
handpieces.  Set includes 3 diamond v-wheels and 3  1/8"x2" mandrels.
Wheel diameters are all 3/4" by 1/8" 25 degree, 1/4" 45 degree, and
3/8" 55 degree. 

New! Guge Sanding Cones

Small Sanders 3/16"x5/8"

   Large Sanders 3/8"x1"

Remove wood quickly with this carbide nugget wheel that resists clogging.
This unit features super tough and extremely long wearing and impact resistant nuggets of tungsten carbide permanently brazed to a steel rim.  Fits most any
4.5" angle grinder.  Hole size 7/8" with 5/8" and 1/2" adapters included. 
Use with guard, 15,000 rpm maximum.
 

If you want professional results then you must use what the professionals use. These are the famous Guge Ceramic Texturing Sticks, size 3/32" diameter, 2" length. Can be cut in half with cut off wheel.  Sticks can be shaped and sharpened with dressing stones. Simply put into power carver and get great, professional texturing results. Blue 800 grit, ceramic texturing stick. Simply wonderful. Be safe, use with your safety goggles.

Diamond Points $3.95 each NEW!!!!

Use on hard and soft woods for carving and fine detailing. They feature sharp natural diamond (80-120 grit) that is well balanced for use in power tools and micro motors. 120, 000 RPM maximum. 3/32" SHANK

PD12	PD22	PD27	PD7
PD3	PD24	PD30	PD25
PD6	PD26	PD2	PD9
PD10	PD15	PD11	PD20

Ruby Carvers 3/32" Shank

Detail Ruby Carvers 3/32" shank  $10.50ea
 

  Larger Ruby Carvers for shaping, smoothing, and refining. 3/32" shank  $12.50 ea

 1/4" Roatary Rasp kit includes the profiles shown here. 

10-PIECE CARBIDE BURR SET 1/8" SHANK 1/4" HEAD
 High-performance tools!  Get the high quality carbide burrs you want, at a great price! Genuine carbide burrs are preferred for carving because they outlast standard steel & “high speed steel” burrs. Teeth are mid depth set for quick stock removal & silky smooth finish. Use with flex-shafts, micro & other grinders. Burr specifications: Shank size: 1/8”; Head Diameter: 1/4”; Overall length: 2”. Max. speed 30,000 rpm. Includes plastic storage box.

This handy little vise is perfect for super precise detail drilling on delicate work. The knurled handle and hex shaped swivel end is designed for comfort and grip. Includes four different split collet sizes for 0 - 1/8" capacity. Tool measures 3-7/8" long.

Bits and Accessories for Power Tools

NEW!  
“Power Carving” rotary tools feature long-lasting, razor-sharp carbide cutting teeth arranged into a unique open pattern to resist “loading” while providing the “Power Carver” rapid stock removal and smoother finishes.
 

All Cutters directly below are 1/8" Shank and shown slightly
larger than actual size.  1/4" shank cutters shown in
separate box below.

8415S  $15.00   Fine Bud

8414S $15.00 Coarse Bud

8115S $15.00  Fine Tree

8114S $15.00 Coarse Tree

8119S $14.00 Long Fine Taper

8118S $14.00 Long Coarse Taper

8339S $15.00 Fine Sphere  7/16" Head dia. 8315S  $15.00 Fine Sphere 1/4" Head dia.

8338S $15.00 Coarse Sphere 7/16" Head dia 8314S  $15.00 Fine Sphere 1/4" Head dia

8515S $15.00 Fine Cylinder

8514S $15.00 Coarse Cylinder

8715S $15.00 Fine Ball Nose

8714S $15.00 Coarse Ball Nose

8719S $14.00 Long Fine Ball Nose

8718S $14.00 Long Coarse Ball Nose

8913S $15.00 Fine Flame

8914S $15.00Coarse Flame

Saburr Burs 1/4" shank  NEW!! Shown close to actual size.

#3470 $21.50 Ballnose  Coarse 3/4" Head

#3471 #17.50  Ballnose, Coarse 1/4" Head

#3472 $20.50 Cylinder Coarse 3/4" Head

#3473 $18.50 Flame Coarse 1/2" Head

#3474 $21.50 Flame Coarse 3/4" Head

#3475 $21.50 Ball Coarse 3/4" Head

#3476 $17.50 Taper Coarse 1/4" Head

#3477 $18.50 Taper Coarse 1/2" Head

#3478 $20.50 Taper Coarse 3/4" Head

New! Cutter and rasp Sets!

#92012 10 Pc High Speed Cutter Set $31.00 A great assortment
of very useful shapes for the woodcarver.  All cutters have 1/8" shanks and
are Titanium Nitride coated for extended life.  Use for shaping, hollowing,
grooving, and sculpting. 
Included shapes are:  cylinder 1/8", cylinder 5/16", ball 1/8", ball 5/16",
tapered radius 1/4", oval 1/4", wheel 3/8", flame 1/4", inverted taper 1/4",
and cone 1/4".

#93010 10pc Rotary Rasp Assortment $32.95  5 High Speed Carbon steel,
 & 5 Titanium Nitride coated rasps will quickly eat through the toughest woods.
 All cutters have 1/8"
 shanks. 
 Titanium Coated Hi Speed Steel shapes included are:  cylinder 5/16", flame 1/4",
 cone 1/4", ball 3/16", cylinder 7/32".

Rotary File Carbon Steel shapes included are:  tree 1/4", cylinder 1/4", ball 1/4",
tree 5/16", cylinder 5/16". 

Rotary Chisel Carbide cutting tool for use in high speed rotary tools (Dremel, Foredom, Wecheer, etc) up to 30,000 RPM. This is the most aggressive and controllable cutting tool available to woodcarvers. At 25,000 RPM makes 1250 cuts per second. Depth of cut 3/16". width of cut 1/8" shank is 1/8". This is a fun little tool.

Engraving Cutters 3/32" Shank (styles listed left to right)

 Marsh Sanders - Used and recommended by Wanda Marsh.  Refill with your own sandpaper.                       

#8205 Marsh Tapered Sander $9.95

Foredom  Stones

White Aluminum Oxide Points $2.25 each
White Aluminum Oxide Point. Extremely fine grit (400) for a high finish on tensile. Extremely fine cutting and points will hold their shape. Great for super fine cutting, creating lines and texturing surfaces.

1/8" head dia. x 7/32" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 71	3/16" head dia. x 17/32" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 76	3/8" head dia. x 5/64" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 77
1/2" head dia. x 1/16" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA.   78	3/8" head dia. x 3/64" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 79	1/4" head dia. x 1/4" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 91
11/64" head dia. x 3/16" head length, 3/32" shank. Max. speed 35,000 rpm. Made in USA. 92

Foredom CeramCut Blue Stones $2.50 each or Order as a set below and Save Money!

Has ceramic and aluminum oxide abrasive grain structure superior in performance and life to standard aluminum oxides or silicon carbides. "CK" Stones remove material faster, run cooler, and last 3-5 times longer than other abrasives. Non-impregnating and non-contaminating. Max. speed 45,000 rpm. Made in USA.  

CK322 Ceramcut Blue Stone in inverted cone shape. 120 grit, 1/8" max. head dia. x 1/8" head length, 3/32" shank.	CK342 CeramCut Blue Stone Ceramcut Blue Stone in inverted cone shape-CK342. 120 grit, 1/8" max. head dia. x 1/4" head length, 3/32" shan	CK352 CeramCut Blue Stone Ceramcut Blue Stone in small cylinder shape. 120 grit, 3/32" max. head dia. x 1/4" head length, 3/32" shank
CK392 CeramCut Blue Stone Ceramcut Blue Stone in small flat taper shape. 120 grit, 3/32" max. head dia. x 3/16" head length, 3/32" shank	CK300 CeramCut Blue Stone Ceramcut Blue Stone in large ball nose shape. 80 grit, 1/4" max. head dia. x 1/2" head length, 3/32" shank	CK301 CeramCut Blue Stone Ceramcut Blue Stone in medium ball nose shape. 120 grit, 3/16" max. head dia. x 1/2" head length, 3/32" shank.
CK302 CeramCut Blue Stone Ceramcut Blue Stone in small ball nose shape. 120 grit, 1/8" max. head dia. x 1/2" head length, 3/32" shank	CK318 CeramCut Blue Stone Ceramcut Blue Stone in flame shape. 80 grit, 5/32" max. head dia. x 3/8" head length, 3/32" shank	CK332 CeramCut Blue Stone Ceramcut Blue Stone in ball shape. 120 grit, 1/8" head, 3/32" shank

Great for fine texturing. General shaping and refining, feather layout on birds. Texturing feathers, fur and hair.   These stones maintain their shape and hold an edge longer than any other stone.   Reshape with a silicon carbide dressing stone.  Sharpen or true a stone using a diamond board.  To clean a reshaped stone, run it over a rubber block.  Set of nine, all stones have a 3/32" shank.  Maximum speed of 45,000rpm.  Overall length of 1-3/4" to 2" depending on head length.  All shapes are fine grit (120) except for large ball nose and flame which are medium grit (80).  Made in USA   Guaranteed by Foredom.

AK22   33Pc Bur Kit  $275.00  The new 33 pc kit contains the burs used by
Frank Russell in his 3-disc DVD set "Fur, Feathers, and Fins".  Kit includes
5 1/4" shank, 8 1/8", and 1 3/32" shank Typhoon burs in coarse and fine grit.
Also 6 CeramCut blue stones, 3 plated diamond points, 3 vanadium steel
cutters, 1 carbide bur, 3 ruby carvers, a sandpaper mandrel, 2 fine nylon
bristle brushes and a rotating bur holder.  A $299.00 Value for only $255.00
 

Ceramcut Accessories

(Reshape the above CeramCut stones)   #10333 Dressing Stone (silicon carbide) $8.50

600 grit the sharpen the above stones)  #10343 Foredom Diamond Hone $8.50

(clean the above stones) #2998 Abrasive Cleaner $7.95

#4005 Wet Stone Unload plated diamonds $2.95

Use to clean Saburr Tooth burs.

Rough shape your carvings easily wiht this kit. Includes quick lock drums in 1/2x3", 1x3", 1 1/2x3" with a fine and coarse band for each drum 1/4" shank.

    Everything you need for sanding and grinding curves and irregular surfaces.  Tighten the nut to expand the rubber drum to hold the sleeves in place.All drums have 1/8" shank.  Comes as shown with 5 rubber drums and 3 sleeves for each drum,one fine, one medium and one coarse.

No need to worry about replacement sleeves! Buy them here!
9 Sleeves per Pack $3.95

  Size 2"x1/2"x3/4"

Round burr holder spins on a lazy susan and holds over 100 bits from sizes 1/16" up to 1/4". 

Holes for 1/8" and 3/32" sized bits. Holds 48 bits (not included)

   Split mandrels are used with strips of sandpaper that you cut to length of the slot and secure with hot glue or a small rubber band. 3/32" shank
     

Dura Grit Cutters

Cutting and shaping wheel for use on hard and soft woods. (carbide) FUN!

Collet nut kit includes 1/8", 3/32", 1/16" & 3/32" collets with nut

HOME     INDEX     HOW TO ORDER      CONTACT US     SHIPPING RATES     SHOWS      www.carve4less.com     www.alpineviewspublishing.com  

ORDERS 1-800-292-6788

 Copyright 1999-2008 Mountain Woodcarvers, Inc.